[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29-rc6 (root@zen) (gcc version 4.3.3 (Debian 4.3.3-3) ) #1 SMP PREEMPT Tue Feb 24 13:26:19 CET 2009 [ 0.000000] Command line: root=/dev/sdc1 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x100000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable) [ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] modified: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] modified: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000 [ 0.000000] last_map_addr: bf780000 end: bf780000 [ 0.000000] ACPI: RSDP 000FB330, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT BF780100, 005C (r1 101508 XSDT1200 20081015 MSFT 97) [ 0.000000] ACPI: FACP BF780290, 00F4 (r3 101508 FACP1200 20081015 MSFT 97) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT BF7804B0, B062 (r1 A1087 A1087001 1 INTL 20060113) [ 0.000000] ACPI: FACS BF798000, 0040 [ 0.000000] ACPI: APIC BF780390, 00D8 (r1 101508 APIC1200 20081015 MSFT 97) [ 0.000000] ACPI: MCFG BF780470, 003C (r1 101508 OEMMCFG 20081015 MSFT 97) [ 0.000000] ACPI: OEMB BF798040, 0072 (r1 101508 OEMB1200 20081015 MSFT 97) [ 0.000000] ACPI: HPET BF78F4B0, 0038 (r1 101508 OEMHPET 20081015 MSFT 97) [ 0.000000] ACPI: OSFR BF78F4F0, 00B0 (r1 101508 OEMOSFR 20081015 MSFT 97) [ 0.000000] ACPI: SSDT BF79A140, 249F (r1 DpgPmm CpuPm 12 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 00bf780000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 000081615c] TEXT DATA BSS ==> [0000200000 - 000081615c] [ 0.000000] #3 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] [ 0.000000] #4 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] On node 0 totalpages: 784140 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1665 pages reserved [ 0.000000] DMA zone: 2259 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10667 pages used for memmap [ 0.000000] DMA32 zone: 769493 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771752 [ 0.000000] Kernel command line: root=/dev/sdc1 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2672.627 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] Calgary: detecting Calgary via BIOS EBDA area [ 0.000999] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000999] Memory: 3079620k/3137024k available (3240k kernel code, 464k absent, 56340k reserved, 1569k data, 404k init) [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.25 BogoMIPS (lpj=2672627) [ 0.000999] Security Framework initialized [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys devices [ 0.000999] Initializing cgroup subsys net_cls [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.001010] CPU0: Thermal monitoring enabled (TM1) [ 0.001067] using mwait in idle threads. [ 0.001753] ACPI: Core revision 20081204 [ 0.014042] Setting APIC routing to flat [ 0.015132] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025192] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.026615] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.000999] CPU1: Thermal monitoring enabled (TM1) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.098108] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.098764] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.099080] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.000999] Initializing CPU#2 [ 0.000999] Calibrating delay using timer specific routine.. 5344.68 BogoMIPS (lpj=2672340) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.000999] CPU2: Thermal monitoring enabled (TM1) [ 0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.172165] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.172821] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.174014] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.000999] Initializing CPU#3 [ 0.000999] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.000999] CPU3: Thermal monitoring enabled (TM1) [ 0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.246107] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.246763] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.247056] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#4 [ 0.000999] Calibrating delay using timer specific routine.. 5558.45 BogoMIPS (lpj=2779228) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.000999] CPU4: Thermal monitoring enabled (TM1) [ 0.000999] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.320238] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.321114] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.322106] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.000999] Initializing CPU#5 [ 0.000999] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.000999] CPU5: Thermal monitoring enabled (TM1) [ 0.000999] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.394563] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.395107] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.396092] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.000999] Initializing CPU#6 [ 0.000999] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.000999] CPU6: Thermal monitoring enabled (TM1) [ 0.000999] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.468619] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.469106] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.470093] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.000999] Initializing CPU#7 [ 0.000999] Calibrating delay using timer specific routine.. 5558.46 BogoMIPS (lpj=2779231) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 256K [ 0.000999] CPU: L3 cache: 8192K [ 0.000999] CPU7: Thermal monitoring enabled (TM1) [ 0.000999] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.542581] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04 [ 0.543108] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.544032] Brought up 8 CPUs [ 0.544086] Total of 8 processors activated (43185.55 BogoMIPS). [ 0.544188] CPU0 attaching sched-domain: [ 0.544190] domain 0: span 0,4 level SIBLING [ 0.544192] groups: 0 4 [ 0.544194] domain 1: span 0-7 level MC [ 0.544196] groups: 0,4 1,5 2,6 3,7 [ 0.544200] CPU1 attaching sched-domain: [ 0.544201] domain 0: span 1,5 level SIBLING [ 0.544202] groups: 1 5 [ 0.544204] domain 1: span 0-7 level MC [ 0.544206] groups: 1,5 2,6 3,7 0,4 [ 0.544209] CPU2 attaching sched-domain: [ 0.544210] domain 0: span 2,6 level SIBLING [ 0.544212] groups: 2 6 [ 0.544214] domain 1: span 0-7 level MC [ 0.544215] groups: 2,6 3,7 0,4 1,5 [ 0.544218] CPU3 attaching sched-domain: [ 0.544219] domain 0: span 3,7 level SIBLING [ 0.544221] groups: 3 7 [ 0.544223] domain 1: span 0-7 level MC [ 0.544224] groups: 3,7 0,4 1,5 2,6 [ 0.544228] CPU4 attaching sched-domain: [ 0.544229] domain 0: span 0,4 level SIBLING [ 0.544230] groups: 4 0 [ 0.544232] domain 1: span 0-7 level MC [ 0.544233] groups: 0,4 1,5 2,6 3,7 [ 0.544237] CPU5 attaching sched-domain: [ 0.544238] domain 0: span 1,5 level SIBLING [ 0.544239] groups: 5 1 [ 0.544242] domain 1: span 0-7 level MC [ 0.544244] groups: 1,5 2,6 3,7 0,4 [ 0.544247] CPU6 attaching sched-domain: [ 0.544248] domain 0: span 2,6 level SIBLING [ 0.544250] groups: 6 2 [ 0.544252] domain 1: span 0-7 level MC [ 0.544253] groups: 2,6 3,7 0,4 1,5 [ 0.544256] CPU7 attaching sched-domain: [ 0.544258] domain 0: span 3,7 level SIBLING [ 0.544259] groups: 7 3 [ 0.544261] domain 1: span 0-7 level MC [ 0.544262] groups: 3,7 0,4 1,5 2,6 [ 0.545049] net_namespace: 1872 bytes [ 0.545106] Booting paravirtualized kernel on bare hardware [ 0.545273] xor: automatically using best checksumming function: generic_sse [ 0.550001] generic_sse: 9608.000 MB/sec [ 0.550057] xor: using function: generic_sse (9608.000 MB/sec) [ 0.550155] NET: Registered protocol family 16 [ 0.550226] ACPI: bus type pci registered [ 0.550226] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.550226] PCI: Not using MMCONFIG. [ 0.550226] PCI: Using configuration type 1 for base access [ 0.552052] bio: create slab at 0 [ 0.553280] ACPI: EC: Look up EC in DSDT [ 0.576792] ACPI: Interpreter enabled [ 0.576850] ACPI: (supports S0 S5) [ 0.576980] ACPI: Using IOAPIC for interrupt routing [ 0.577057] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.579671] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.588611] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.597111] ACPI: No dock devices found. [ 0.597235] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.597309] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.597309] pci 0000:00:01.0: PME# disabled [ 0.597309] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.597318] pci 0000:00:03.0: PME# disabled [ 0.597424] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.597484] pci 0000:00:07.0: PME# disabled [ 0.598003] pci 0000:00:13.0: reg 10 32bit mmio: [0xfec8a000-0xfec8afff] [ 0.598031] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.598091] pci 0000:00:13.0: PME# disabled [ 0.598342] pci 0000:00:1a.0: reg 20 io port: [0x8800-0x881f] [ 0.598406] pci 0000:00:1a.1: reg 20 io port: [0x8880-0x889f] [ 0.598467] pci 0000:00:1a.2: reg 20 io port: [0x8c00-0x8c1f] [ 0.598531] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fffc00-0xf7ffffff] [ 0.598581] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.598642] pci 0000:00:1a.7: PME# disabled [ 0.598731] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff] [ 0.598768] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.598828] pci 0000:00:1b.0: PME# disabled [ 0.598932] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.598992] pci 0000:00:1c.0: PME# disabled [ 0.599051] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.599111] pci 0000:00:1c.2: PME# disabled [ 0.599216] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.599277] pci 0000:00:1c.3: PME# disabled [ 0.599382] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.599442] pci 0000:00:1c.4: PME# disabled [ 0.599547] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.599608] pci 0000:00:1c.5: PME# disabled [ 0.599708] pci 0000:00:1d.0: reg 20 io port: [0x8080-0x809f] [ 0.599769] pci 0000:00:1d.1: reg 20 io port: [0x8400-0x841f] [ 0.599831] pci 0000:00:1d.2: reg 20 io port: [0x8480-0x849f] [ 0.599895] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fff800-0xf7fffbff] [ 0.599945] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.600003] pci 0000:00:1d.7: PME# disabled [ 0.600163] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.600240] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.600301] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.600378] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.600507] pci 0000:00:1f.2: reg 10 io port: [0x7c00-0x7c07] [ 0.600511] pci 0000:00:1f.2: reg 14 io port: [0x7880-0x7883] [ 0.600516] pci 0000:00:1f.2: reg 18 io port: [0x7800-0x7807] [ 0.600520] pci 0000:00:1f.2: reg 1c io port: [0x7480-0x7483] [ 0.600525] pci 0000:00:1f.2: reg 20 io port: [0x7400-0x741f] [ 0.600530] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7ffe800-0xf7ffefff] [ 0.600559] pci 0000:00:1f.2: PME# supported from D3hot [ 0.600617] pci 0000:00:1f.2: PME# disabled [ 0.600696] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7fff400-0xf7fff4ff] [ 0.600707] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.600770] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.600778] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.600785] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.600790] pci 0000:02:00.0: reg 24 io port: [0x9c00-0x9c7f] [ 0.600794] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb9e0000-0xfb9fffff] [ 0.600834] pci 0000:00:03.0: bridge io port: [0x9000-0x9fff] [ 0.600837] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb9fffff] [ 0.600841] pci 0000:00:03.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.600900] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd7f00000-0xd7ffffff] [ 0.601008] pci 0000:07:00.0: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff] [ 0.601015] pci 0000:07:00.0: reg 18 io port: [0xd800-0xd8ff] [ 0.601039] pci 0000:07:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff] [ 0.601076] pci 0000:07:00.0: supports D1 D2 [ 0.601078] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.601140] pci 0000:07:00.0: PME# disabled [ 0.601230] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 0.601233] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.601288] pci 0000:06:00.0: reg 18 io port: [0xcc00-0xcc7f] [ 0.601306] pci 0000:06:00.0: reg 20 64bit mmio: [0xfbcff000-0xfbcfffff] [ 0.601313] pci 0000:06:00.0: reg 30 32bit mmio: [0xfbc80000-0xfbcbffff] [ 0.601343] pci 0000:06:00.0: supports D1 [ 0.601344] pci 0000:06:00.0: PME# supported from D0 D1 D3hot [ 0.601405] pci 0000:06:00.0: PME# disabled [ 0.601499] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff] [ 0.601502] pci 0000:00:1c.3: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 0.601546] pci 0000:05:00.0: reg 10 io port: [0xbc00-0xbc07] [ 0.601553] pci 0000:05:00.0: reg 14 io port: [0xb880-0xb883] [ 0.601560] pci 0000:05:00.0: reg 18 io port: [0xb800-0xb807] [ 0.601566] pci 0000:05:00.0: reg 1c io port: [0xb480-0xb483] [ 0.601573] pci 0000:05:00.0: reg 20 io port: [0xb400-0xb40f] [ 0.601580] pci 0000:05:00.0: reg 24 32bit mmio: [0xfbbffc00-0xfbbfffff] [ 0.601618] pci 0000:05:00.0: supports D1 [ 0.601619] pci 0000:05:00.0: PME# supported from D0 D1 D3hot [ 0.601680] pci 0000:05:00.0: PME# disabled [ 0.601774] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] [ 0.601777] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] [ 0.601833] pci 0000:04:00.0: reg 10 64bit mmio: [0xfbafc000-0xfbafffff] [ 0.601840] pci 0000:04:00.0: reg 18 io port: [0xa800-0xa8ff] [ 0.601864] pci 0000:04:00.0: reg 30 32bit mmio: [0xfbac0000-0xfbadffff] [ 0.601901] pci 0000:04:00.0: supports D1 D2 [ 0.601902] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.601965] pci 0000:04:00.0: PME# disabled [ 0.602035] pci 0000:00:1c.5: bridge io port: [0xa000-0xafff] [ 0.602038] pci 0000:00:1c.5: bridge 32bit mmio: [0xfba00000-0xfbafffff] [ 0.602073] pci 0000:09:00.0: reg 10 32bit mmio: [0xdc000000-0xdfffffff] [ 0.602145] pci 0000:09:01.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff] [ 0.602218] pci 0000:09:02.0: reg 10 32bit mmio: [0xfbeff800-0xfbefffff] [ 0.602224] pci 0000:09:02.0: reg 14 io port: [0xec00-0xec7f] [ 0.602264] pci 0000:09:02.0: supports D2 [ 0.602265] pci 0000:09:02.0: PME# supported from D2 D3hot D3cold [ 0.602326] pci 0000:09:02.0: PME# disabled [ 0.602418] pci 0000:00:1e.0: transparent bridge [ 0.602476] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.602479] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.602484] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] [ 0.602514] pci_bus 0000:00: on NUMA node 0 [ 0.602520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.602775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.602873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.602932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.603014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.603072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.603128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.603185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 0.603241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 0.603297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 0.635094] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.635662] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.635945] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.636521] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.637089] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.637653] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.638207] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.638772] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.639274] SCSI subsystem initialized [ 0.639274] libata version 3.00 loaded. [ 0.639274] usbcore: registered new interface driver usbfs [ 0.639274] usbcore: registered new interface driver hub [ 0.639274] usbcore: registered new device driver usb [ 0.640009] PCI: Using ACPI for IRQ routing [ 0.645045] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.645276] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.652007] Switched to high resolution mode on CPU 0 [ 0.652349] Switched to high resolution mode on CPU 5 [ 0.652369] Switched to high resolution mode on CPU 7 [ 0.652402] Switched to high resolution mode on CPU 6 [ 0.652591] Switched to high resolution mode on CPU 4 [ 0.652916] Switched to high resolution mode on CPU 1 [ 0.652931] Switched to high resolution mode on CPU 3 [ 0.652977] Switched to high resolution mode on CPU 2 [ 0.655009] pnp: PnP ACPI init [ 0.655073] ACPI: bus type pnp registered [ 0.657851] pnp: PnP ACPI: found 15 devices [ 0.657908] ACPI: ACPI bus type pnp unregistered [ 0.657969] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 0.658034] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.658095] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.658157] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.658221] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.658283] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.658343] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.658402] system 00:07: ioport range 0x500-0x57f could not be reserved [ 0.658463] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.658524] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.658585] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.658649] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.658711] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.658772] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.658835] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.658898] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.658958] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.659020] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.659081] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved [ 0.659156] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.664025] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.664084] pci 0000:00:01.0: IO window: disabled [ 0.664143] pci 0000:00:01.0: MEM window: disabled [ 0.664201] pci 0000:00:01.0: PREFETCH window: disabled [ 0.664262] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 0.664321] pci 0000:00:03.0: IO window: 0x9000-0x9fff [ 0.664381] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb9fffff [ 0.664441] pci 0000:00:03.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.664518] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 0.664576] pci 0000:00:07.0: IO window: disabled [ 0.664635] pci 0000:00:07.0: MEM window: disabled [ 0.664693] pci 0000:00:07.0: PREFETCH window: disabled [ 0.664753] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.664811] pci 0000:00:1c.0: IO window: disabled [ 0.664870] pci 0000:00:1c.0: MEM window: disabled [ 0.664928] pci 0000:00:1c.0: PREFETCH window: 0x000000d7f00000-0x000000d7ffffff [ 0.665008] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07 [ 0.665068] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 0.665128] pci 0000:00:1c.2: MEM window: 0xfbd00000-0xfbdfffff [ 0.665189] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.665250] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.665309] pci 0000:00:1c.3: IO window: 0xc000-0xcfff [ 0.665369] pci 0000:00:1c.3: MEM window: 0xfbc00000-0xfbcfffff [ 0.665429] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.665490] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 [ 0.665549] pci 0000:00:1c.4: IO window: 0xb000-0xbfff [ 0.665609] pci 0000:00:1c.4: MEM window: 0xfbb00000-0xfbbfffff [ 0.665669] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.665730] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.670050] pci 0000:00:1c.5: IO window: 0xa000-0xafff [ 0.670110] pci 0000:00:1c.5: MEM window: 0xfba00000-0xfbafffff [ 0.670171] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.670232] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.670291] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.670351] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff [ 0.670412] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff [ 0.670495] pci 0000:00:01.0: setting latency timer to 64 [ 0.670500] pci 0000:00:03.0: setting latency timer to 64 [ 0.670506] pci 0000:00:07.0: setting latency timer to 64 [ 0.670514] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.670575] pci 0000:00:1c.0: setting latency timer to 64 [ 0.670582] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.670644] pci 0000:00:1c.2: setting latency timer to 64 [ 0.670650] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.670712] pci 0000:00:1c.3: setting latency timer to 64 [ 0.670717] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.670778] pci 0000:00:1c.4: setting latency timer to 64 [ 0.670785] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.670847] pci 0000:00:1c.5: setting latency timer to 64 [ 0.670852] pci 0000:00:1e.0: setting latency timer to 64 [ 0.670854] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.670856] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.670857] pci_bus 0000:01: resource 0 mem: [0x0-0x0] [ 0.670859] pci_bus 0000:01: resource 1 mem: [0x0-0x0] [ 0.670860] pci_bus 0000:01: resource 2 mem: [0x0-0x0] [ 0.670861] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.670863] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.670864] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb9fffff] [ 0.670865] pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff] [ 0.670867] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.670868] pci_bus 0000:03: resource 0 mem: [0x0-0x0] [ 0.670869] pci_bus 0000:03: resource 1 mem: [0x0-0x0] [ 0.670870] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 0.670872] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.670873] pci_bus 0000:08: resource 0 mem: [0x0-0x0] [ 0.670874] pci_bus 0000:08: resource 1 mem: [0x0-0x0] [ 0.670875] pci_bus 0000:08: resource 2 mem: [0xd7f00000-0xd7ffffff] [ 0.670877] pci_bus 0000:08: resource 3 mem: [0x0-0x0] [ 0.670878] pci_bus 0000:07: resource 0 io: [0xd000-0xdfff] [ 0.670879] pci_bus 0000:07: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 0.670881] pci_bus 0000:07: resource 2 mem: [0x0-0x0] [ 0.670882] pci_bus 0000:07: resource 3 mem: [0x0-0x0] [ 0.670883] pci_bus 0000:06: resource 0 io: [0xc000-0xcfff] [ 0.670885] pci_bus 0000:06: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 0.670886] pci_bus 0000:06: resource 2 mem: [0x0-0x0] [ 0.670887] pci_bus 0000:06: resource 3 mem: [0x0-0x0] [ 0.670888] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff] [ 0.670890] pci_bus 0000:05: resource 1 mem: [0xfbb00000-0xfbbfffff] [ 0.670891] pci_bus 0000:05: resource 2 mem: [0x0-0x0] [ 0.670892] pci_bus 0000:05: resource 3 mem: [0x0-0x0] [ 0.670894] pci_bus 0000:04: resource 0 io: [0xa000-0xafff] [ 0.670895] pci_bus 0000:04: resource 1 mem: [0xfba00000-0xfbafffff] [ 0.670896] pci_bus 0000:04: resource 2 mem: [0x0-0x0] [ 0.670898] pci_bus 0000:04: resource 3 mem: [0x0-0x0] [ 0.670899] pci_bus 0000:09: resource 0 io: [0xe000-0xefff] [ 0.670900] pci_bus 0000:09: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.670902] pci_bus 0000:09: resource 2 mem: [0xd8000000-0xdfffffff] [ 0.670903] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 0.670904] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.670955] NET: Registered protocol family 2 [ 0.683099] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.683475] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.684073] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.684274] TCP: Hash tables configured (established 262144 bind 65536) [ 0.684335] TCP reno registered [ 0.688167] NET: Registered protocol family 1 [ 0.689572] Scanning for low memory corruption every 60 seconds [ 0.690015] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.690409] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.690615] msgmni has been set to 6016 [ 0.690803] alg: No test for stdrng (krng) [ 0.690867] async_tx: api initialized (async) [ 0.690960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.691038] io scheduler noop registered [ 0.691094] io scheduler anticipatory registered [ 0.691151] io scheduler deadline registered [ 0.691223] io scheduler cfq registered (default) [ 0.691417] pci 0000:02:00.0: Boot video device [ 0.691507] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.691558] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X [ 0.691653] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 0.691700] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X [ 0.691791] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 0.691839] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X [ 0.691930] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.691976] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X [ 0.692088] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.692135] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X [ 0.692298] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.692344] pcieport-driver 0000:00:1c.3: irq 53 for MSI/MSI-X [ 0.692454] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.692499] pcieport-driver 0000:00:1c.4: irq 54 for MSI/MSI-X [ 0.692608] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.692654] pcieport-driver 0000:00:1c.5: irq 55 for MSI/MSI-X [ 0.692790] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support [ 0.692795] aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support [ 0.692799] aer 0000:00:07.0:pcie01: AER service couldn't init device: no _OSC support [ 0.694596] Linux agpgart interface v0.103 [ 0.694652] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.696015] brd: module loaded [ 0.696355] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.696458] mvsas 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.696522] mvsas 0000:06:00.0: setting latency timer to 64 [ 2.011038] mvsas 0000:06:00.0: phy[0] Get Attached Address 0x0 , SAS Address 0x5005043011AB0000 [ 2.011042] mvsas 0000:06:00.0: Rate = 9 , type = 1 [ 2.112036] mvsas 0000:06:00.0: phy[1] Get Attached Address 0x1 , SAS Address 0x5005043011AB0000 [ 2.112039] mvsas 0000:06:00.0: Rate = 9 , type = 1 [ 2.314048] scsi0 : mvsas [ 2.314393] mvsas 0000:06:00.0: version 0.5.2 [ 2.314450] mvsas 0000:06:00.0: 4 phys, addr 5005043011ab0000 [ 2.314590] Driver 'sd' needs updating - please use bus_type methods [ 2.314668] Driver 'sr' needs updating - please use bus_type methods [ 2.314758] ahci 0000:00:1f.2: version 3.0 [ 2.314767] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 2.314850] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X [ 2.314873] ahci: SSS flag set, parallel bus scan disabled [ 2.314964] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.315045] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 2.315123] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.315310] scsi1 : ahci [ 2.315411] scsi2 : ahci [ 2.315504] scsi3 : ahci [ 2.315596] scsi4 : ahci [ 2.315690] scsi5 : ahci [ 2.315782] scsi6 : ahci [ 2.315944] ata1: SATA max UDMA/133 abar m2048@0xf7ffe800 port 0xf7ffe900 irq 56 [ 2.316022] ata2: SATA max UDMA/133 abar m2048@0xf7ffe800 port 0xf7ffe980 irq 56 [ 2.316097] ata3: SATA max UDMA/133 abar m2048@0xf7ffe800 port 0xf7ffea00 irq 56 [ 2.316172] ata4: SATA max UDMA/133 abar m2048@0xf7ffe800 port 0xf7ffea80 irq 56 [ 2.316247] ata5: SATA max UDMA/133 abar m2048@0xf7ffe800 port 0xf7ffeb00 irq 56 [ 2.316322] ata6: SATA max UDMA/133 abar m2048@0xf7ffe800 port 0xf7ffeb80 irq 56 [ 2.327321] ata7.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 2.327387] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.333874] ata7.00: configured for UDMA/133 [ 2.333989] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 2.346821] ata8.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 2.346886] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.353409] ata8.00: configured for UDMA/133 [ 2.353503] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 2.774013] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.788184] ata1.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133 [ 2.788254] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.789236] ata1.00: configured for UDMA/133 [ 2.800020] scsi: waiting for bus probes to complete ... [ 3.315122] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.315209] sd 0:0:0:0: [sda] Write Protect is off [ 3.315266] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.315280] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.315393] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.315475] sd 0:0:0:0: [sda] Write Protect is off [ 3.315532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.315544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.315623] sda: sda1 [ 3.337144] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.337330] sd 0:0:1:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.337413] sd 0:0:1:0: [sdb] Write Protect is off [ 3.337469] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.337482] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.337586] sd 0:0:1:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.337668] sd 0:0:1:0: [sdb] Write Protect is off [ 3.337725] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.337737] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.337815] sdb: sdb1 [ 3.357786] sd 0:0:1:0: [sdb] Attached SCSI disk [ 3.357941] scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5 [ 3.358100] sd 1:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 3.358183] sd 1:0:0:0: [sdc] Write Protect is off [ 3.358239] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.358253] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.358357] sd 1:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 3.358438] sd 1:0:0:0: [sdc] Write Protect is off [ 3.358495] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.358508] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.358585] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 > [ 3.410152] sd 1:0:0:0: [sdc] Attached SCSI disk [ 3.868039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.868305] ata2.00: ATAPI: ASUS DRW-20B1LT, 1.00, max UDMA/100 [ 3.869046] ata2.00: configured for UDMA/100 [ 3.880998] scsi 2:0:0:0: CD-ROM ASUS DRW-20B1LT 1.00 PQ: 0 ANSI: 5 [ 3.886219] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.886301] Uniform CD-ROM driver Revision: 3.20 [ 3.886442] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.344042] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.350420] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 4.350486] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.356942] ata3.00: configured for UDMA/133 [ 4.367079] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 4.367245] sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 4.367328] sd 3:0:0:0: [sdd] Write Protect is off [ 4.367385] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.367398] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.367503] sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 4.367586] sd 3:0:0:0: [sdd] Write Protect is off [ 4.367642] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.367655] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.367733] sdd: sdd1 [ 4.373279] sd 3:0:0:0: [sdd] Attached SCSI disk [ 4.831040] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.840975] ata4.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133 [ 4.841044] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.841903] ata4.00: configured for UDMA/133 [ 4.852077] scsi 4:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5 [ 4.852245] sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 4.852328] sd 4:0:0:0: [sde] Write Protect is off [ 4.852384] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 4.852397] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.852501] sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 4.852583] sd 4:0:0:0: [sde] Write Protect is off [ 4.852640] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 4.852653] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.852730] sde: sde1 [ 4.857991] sd 4:0:0:0: [sde] Attached SCSI disk [ 5.316047] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.322451] ata5.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 5.322517] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.329011] ata5.00: configured for UDMA/133 [ 5.339077] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 5.339242] sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 5.339324] sd 5:0:0:0: [sdf] Write Protect is off [ 5.339381] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 5.339394] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.339498] sd 5:0:0:0: [sdf] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 5.339580] sd 5:0:0:0: [sdf] Write Protect is off [ 5.339637] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 5.339650] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.343990] sdf: sdf1 [ 5.357506] sd 5:0:0:0: [sdf] Attached SCSI disk [ 5.815036] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.826102] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 5.826171] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.827034] ata6.00: configured for UDMA/133 [ 5.838077] scsi 6:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 5.838242] sd 6:0:0:0: [sdg] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 5.838325] sd 6:0:0:0: [sdg] Write Protect is off [ 5.838381] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 5.838394] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.838502] sd 6:0:0:0: [sdg] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 5.838583] sd 6:0:0:0: [sdg] Write Protect is off [ 5.838640] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 5.838653] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.838731] sdg: sdg1 [ 5.843223] sd 6:0:0:0: [sdg] Attached SCSI disk [ 5.843442] pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.843533] pata_marvell 0000:05:00.0: setting latency timer to 64 [ 5.843573] scsi7 : pata_marvell [ 5.843671] scsi8 : pata_marvell [ 5.843754] ata9: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 16 [ 5.843815] ata10: PATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 16 [ 6.167445] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 6.167504] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 6.168025] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.168153] mice: PS/2 mouse device common for all mice [ 6.168254] rtc_cmos 00:03: RTC can wake from S4 [ 6.168344] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 6.168424] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.185142] raid6: int64x1 3058 MB/s [ 6.186027] input: AT Translated Set 2 keyboard as /class/input/input0 [ 6.202139] raid6: int64x2 3816 MB/s [ 6.219134] raid6: int64x4 2945 MB/s [ 6.236137] raid6: int64x8 2394 MB/s [ 6.253130] raid6: sse2x1 6667 MB/s [ 6.270132] raid6: sse2x2 7828 MB/s [ 6.287128] raid6: sse2x4 9242 MB/s [ 6.287182] raid6: using algorithm sse2x4 (9242 MB/s) [ 6.287240] md: raid6 personality registered for level 6 [ 6.287297] md: raid5 personality registered for level 5 [ 6.287355] md: raid4 personality registered for level 4 [ 6.287413] cpuidle: using governor ladder [ 6.287468] cpuidle: using governor menu [ 6.287526] No iBFT detected. [ 6.287836] TCP cubic registered [ 6.287891] Initializing XFRM netlink socket [ 6.287951] NET: Registered protocol family 17 [ 6.288012] NET: Registered protocol family 15 [ 6.288248] RPC: Registered udp transport module. [ 6.288305] RPC: Registered tcp transport module. [ 6.288620] rtc_cmos 00:03: setting system clock to 2009-03-27 18:44:37 UTC (1238179477) [ 6.389030] md: Waiting for all devices to be available before autodetect [ 6.389100] md: If you don't use raid, use raid=noautodetect [ 6.389247] md: Autodetecting RAID arrays. [ 6.525232] md: Scanned 6 and added 6 devices. [ 6.525295] md: autorun ... [ 6.525348] md: considering sdg1 ... [ 6.525404] md: adding sdg1 ... [ 6.525459] md: adding sdf1 ... [ 6.525514] md: adding sde1 ... [ 6.525569] md: adding sdd1 ... [ 6.525624] md: adding sdb1 ... [ 6.525679] md: adding sda1 ... [ 6.525734] md: created md0 [ 6.525787] md: bind [ 6.525845] md: bind [ 6.525902] md: bind [ 6.525959] md: bind [ 6.526016] md: bind [ 6.526073] md: bind [ 6.526133] md: running: [ 6.526482] raid5: device sdg1 operational as raid disk 5 [ 6.526540] raid5: device sdf1 operational as raid disk 4 [ 6.526598] raid5: device sde1 operational as raid disk 3 [ 6.526655] raid5: device sdd1 operational as raid disk 2 [ 6.526713] raid5: device sdb1 operational as raid disk 1 [ 6.526770] raid5: device sda1 operational as raid disk 0 [ 6.527146] raid5: allocated 6368kB for md0 [ 6.527202] raid5: raid level 6 set md0 active with 6 out of 6 devices, algorithm 2 [ 6.527277] RAID5 conf printout: [ 6.527331] --- rd:6 wd:6 [ 6.527383] disk 0, o:1, dev:sda1 [ 6.527437] disk 1, o:1, dev:sdb1 [ 6.527491] disk 2, o:1, dev:sdd1 [ 6.527545] disk 3, o:1, dev:sde1 [ 6.527599] disk 4, o:1, dev:sdf1 [ 6.527653] disk 5, o:1, dev:sdg1 [ 6.527747] md: ... autorun DONE. [ 6.539161] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.539227] EXT3-fs: write access will be enabled during recovery. [ 6.628384] kjournald starting. Commit interval 5 seconds [ 6.628388] EXT3-fs: recovery complete. [ 6.628657] EXT3-fs: mounted filesystem with ordered data mode. [ 6.628729] VFS: Mounted root (ext3 filesystem) readonly on device 8:33. [ 6.628797] Freeing unused kernel memory: 404k freed [ 8.128271] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.128350] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 8.128427] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 8.128501] sr 2:0:0:0: Attached scsi generic sg3 type 5 [ 8.128575] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 8.128649] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 8.128722] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 8.128798] sd 6:0:0:0: Attached scsi generic sg7 type 0 [ 8.259347] ACPI: SSDT BF7980C0, 0403 (r1 DpgPmm P001Ist 11 INTL 20060113) [ 8.262279] processor ACPI_CPU:00: registered as cooling_device0 [ 8.262799] ACPI: SSDT BF7984D0, 0403 (r1 DpgPmm P002Ist 12 INTL 20060113) [ 8.265654] processor ACPI_CPU:01: registered as cooling_device1 [ 8.266196] ACPI: SSDT BF7988E0, 0403 (r1 DpgPmm P003Ist 12 INTL 20060113) [ 8.269074] processor ACPI_CPU:02: registered as cooling_device2 [ 8.269585] ACPI: SSDT BF798CF0, 0403 (r1 DpgPmm P004Ist 12 INTL 20060113) [ 8.272439] processor ACPI_CPU:03: registered as cooling_device3 [ 8.272889] md0:ACPI: SSDT BF799100, 0403 (r1 DpgPmm P005Ist 12 INTL 20060113) [ 8.273087] unknown partition table [ 8.275872] processor ACPI_CPU:04: registered as cooling_device4 [ 8.276397] ACPI: SSDT BF799510, 0403 (r1 DpgPmm P006Ist 12 INTL 20060113) [ 8.279340] processor ACPI_CPU:05: registered as cooling_device5 [ 8.279463] input: Power Button (FF) as /class/input/input1 [ 8.282028] ACPI: WMI: Mapper loaded [ 8.288083] ACPI: Power Button (FF) [PWRF] [ 8.288184] input: Power Button (CM) as /class/input/input2 [ 8.288602] ACPI: SSDT BF799920, 0403 (r1 DpgPmm P007Ist 12 INTL 20060113) [ 8.291554] processor ACPI_CPU:06: registered as cooling_device6 [ 8.292079] ACPI: SSDT BF799D30, 0403 (r1 DpgPmm P008Ist 12 INTL 20060113) [ 8.294950] processor ACPI_CPU:07: registered as cooling_device7 [ 8.298888] uhci_hcd: USB Universal Host Controller Interface driver [ 8.298978] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.299044] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.299046] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.299158] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.299254] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008800 [ 8.299338] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.299398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.299472] usb usb1: Product: UHCI Host Controller [ 8.299529] usb usb1: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 8.299588] usb usb1: SerialNumber: 0000:00:1a.0 [ 8.299675] usb usb1: configuration #1 chosen from 1 choice [ 8.299750] hub 1-0:1.0: USB hub found [ 8.299807] hub 1-0:1.0: 2 ports detected [ 8.299939] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.300004] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.300006] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.300088] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 8.300192] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008880 [ 8.300273] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.300333] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.300407] usb usb2: Product: UHCI Host Controller [ 8.300463] usb usb2: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 8.300522] usb usb2: SerialNumber: 0000:00:1a.1 [ 8.300607] usb usb2: configuration #1 chosen from 1 choice [ 8.300687] hub 2-0:1.0: USB hub found [ 8.300745] hub 2-0:1.0: 2 ports detected [ 8.300859] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 8.300923] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 8.300926] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 8.301012] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 8.305370] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008c00 [ 8.305450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.305511] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.305585] usb usb3: Product: UHCI Host Controller [ 8.305641] usb usb3: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 8.305699] usb usb3: SerialNumber: 0000:00:1a.2 [ 8.305786] usb usb3: configuration #1 chosen from 1 choice [ 8.305860] hub 3-0:1.0: USB hub found [ 8.305917] hub 3-0:1.0: 2 ports detected [ 8.306034] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.306102] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.306104] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.306189] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 8.306292] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008080 [ 8.306375] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.306435] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.306509] usb usb4: Product: UHCI Host Controller [ 8.306566] usb usb4: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 8.306624] usb usb4: SerialNumber: 0000:00:1d.0 [ 8.306712] usb usb4: configuration #1 chosen from 1 choice [ 8.306790] hub 4-0:1.0: USB hub found [ 8.306848] hub 4-0:1.0: 2 ports detected [ 8.306963] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.307028] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.307031] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.307136] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 8.307231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008400 [ 8.307311] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.307371] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.307445] usb usb5: Product: UHCI Host Controller [ 8.307501] usb usb5: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 8.307560] usb usb5: SerialNumber: 0000:00:1d.1 [ 8.307645] usb usb5: configuration #1 chosen from 1 choice [ 8.307718] hub 5-0:1.0: USB hub found [ 8.307775] hub 5-0:1.0: 2 ports detected [ 8.307894] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.307958] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.307961] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.308049] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 8.308062] ACPI: Power Button (CM) [PWRB] [ 8.308206] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008480 [ 8.308286] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.308346] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.308420] usb usb6: Product: UHCI Host Controller [ 8.308477] usb usb6: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 8.308535] usb usb6: SerialNumber: 0000:00:1d.2 [ 8.308620] usb usb6: configuration #1 chosen from 1 choice [ 8.308695] hub 6-0:1.0: USB hub found [ 8.308752] hub 6-0:1.0: 2 ports detected [ 8.329917] input: PC Speaker as /class/input/input3 [ 8.381203] sky2 driver version 1.22 [ 8.381281] sky2 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.381347] sky2 0000:07:00.0: setting latency timer to 64 [ 8.381373] sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3 [ 8.413963] sky2 0000:07:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller [ 8.414040] Part Number: Yukon 88E8056 [ 8.414041] Engineering Level: Rev. 1.2 [ 8.414042] Manufacturer: Marvell [ 8.414091] sky2 0000:07:00.0: irq 57 for MSI/MSI-X [ 8.414331] sky2 eth0: addr 00:23:54:3c:ca:6f [ 8.414403] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.414470] sky2 0000:04:00.0: setting latency timer to 64 [ 8.414494] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 [ 8.447954] sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller [ 8.448028] Part Number: Yukon 88E8056 [ 8.448030] Engineering Level: Rev. 1.2 [ 8.448031] Manufacturer: Marvell [ 8.448076] sky2 0000:04:00.0: irq 58 for MSI/MSI-X [ 8.448304] sky2 eth1: addr 00:23:54:3c:ca:6e [ 8.528456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.528516] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 8.528607] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.528681] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.528684] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.528784] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 8.532757] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.532817] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 8.532821] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00 [ 8.592472] ohci1394 0000:09:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.607179] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 8.614105] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.614190] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.614255] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.614333] usb usb7: Product: EHCI Host Controller [ 8.614397] usb usb7: Manufacturer: Linux 2.6.29-rc6 ehci_hcd [ 8.614460] usb usb7: SerialNumber: 0000:00:1a.7 [ 8.614588] usb usb7: configuration #1 chosen from 1 choice [ 8.614679] hub 7-0:1.0: USB hub found [ 8.614741] hub 7-0:1.0: 6 ports detected [ 8.614916] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.614998] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 8.615079] ACPI: Device needs an ACPI driver [ 8.615193] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.615284] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.615288] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.615395] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 8.619371] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.619434] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8.619441] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800 [ 8.646144] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fbeff800-fbefffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 8.669224] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 8.676008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.676089] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.676151] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.676225] usb usb8: Product: EHCI Host Controller [ 8.676282] usb usb8: Manufacturer: Linux 2.6.29-rc6 ehci_hcd [ 8.676340] usb usb8: SerialNumber: 0000:00:1d.7 [ 8.676446] usb usb8: configuration #1 chosen from 1 choice [ 8.676523] hub 8-0:1.0: USB hub found [ 8.676581] hub 8-0:1.0: 6 ports detected [ 8.818951] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.819062] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.930718] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... [ 8.979020] usb 7-5: new high speed USB device using ehci_hcd and address 2 [ 9.093308] usb 7-5: New USB device found, idVendor=0409, idProduct=005a [ 9.093376] usb 7-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.093482] usb 7-5: configuration #1 chosen from 1 choice [ 9.093696] hub 7-5:1.0: USB hub found [ 9.093804] hub 7-5:1.0: 4 ports detected [ 9.196011] usb 8-3: new high speed USB device using ehci_hcd and address 2 [ 9.311205] usb 8-3: New USB device found, idVendor=1058, idProduct=1100 [ 9.311273] usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.311334] usb 8-3: Product: My Book [ 9.311390] usb 8-3: Manufacturer: Western Digital [ 9.311446] usb 8-3: SerialNumber: 57442D574341554631353237383038 [ 9.311547] usb 8-3: configuration #1 chosen from 1 choice [ 9.354177] Initializing USB Mass Storage driver... [ 9.354302] scsi9 : SCSI emulation for USB Mass Storage devices [ 9.354400] usb-storage: device found at 2 [ 9.354402] usb-storage: waiting for device to settle before scanning [ 9.354407] usbcore: registered new interface driver usb-storage [ 9.354467] USB Mass Storage support registered. [ 9.660011] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 9.825348] usb 6-1: New USB device found, idVendor=0a81, idProduct=0205 [ 9.825418] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.825487] usb 6-1: Product: PS2 to USB Converter [ 9.825552] usb 6-1: Manufacturer: CHESEN [ 9.825668] usb 6-1: configuration #1 chosen from 1 choice [ 9.869263] usbcore: registered new interface driver hiddev [ 9.883479] input: CHESEN PS2 to USB Converter as /class/input/input4 [ 9.908205] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1/input0 [ 9.909248] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000192ec9d] [ 9.932506] input: CHESEN PS2 to USB Converter as /class/input/input5 [ 10.097202] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1/input1 [ 10.097294] usbcore: registered new interface driver usbhid [ 10.097352] usbhid: v2.6:USB HID core driver [ 10.246755] Adding 11719376k swap on /dev/sdc7. Priority:-1 extents:1 across:11719376k [ 10.432641] EXT3 FS on sdc1, internal journal [ 11.157171] loop: module loaded [ 11.207421] device-mapper: uevent: version 1.0.3 [ 11.207531] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 14.354170] usb-storage: device scan complete [ 14.354210] isa bounce pool size: 16 pages [ 14.354661] scsi 9:0:0:0: Direct-Access WD 5000AAV External 1.65 PQ: 0 ANSI: 4 [ 14.355519] sd 9:0:0:0: [sdh] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 14.356393] sd 9:0:0:0: [sdh] Write Protect is off [ 14.356451] sd 9:0:0:0: [sdh] Mode Sense: 21 00 00 00 [ 14.356452] sd 9:0:0:0: [sdh] Assuming drive cache: write through [ 14.357146] sd 9:0:0:0: [sdh] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 14.358017] sd 9:0:0:0: [sdh] Write Protect is off [ 14.358074] sd 9:0:0:0: [sdh] Mode Sense: 21 00 00 00 [ 14.358075] sd 9:0:0:0: [sdh] Assuming drive cache: write through [ 14.362398] sdh: sdh1 [ 20.843826] sd 9:0:0:0: [sdh] Attached SCSI disk [ 20.843926] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 59.063276] kjournald starting. Commit interval 5 seconds [ 59.063471] EXT3 FS on sdc9, internal journal [ 59.063570] EXT3-fs: mounted filesystem with ordered data mode. [ 59.086529] kjournald starting. Commit interval 5 seconds [ 59.086717] EXT3 FS on sdc8, internal journal [ 59.086816] EXT3-fs: mounted filesystem with ordered data mode. [ 59.114649] kjournald starting. Commit interval 5 seconds [ 59.114830] EXT3 FS on sdc5, internal journal [ 59.114928] EXT3-fs: mounted filesystem with ordered data mode. [ 59.138387] kjournald starting. Commit interval 5 seconds [ 59.138562] EXT3 FS on sdc6, internal journal [ 59.138661] EXT3-fs: mounted filesystem with ordered data mode. [ 59.360994] EXT4-fs: ext4_check_descriptors: Block bitmap for group 0 not in group (block 3273617603)! [ 59.361080] EXT4-fs: group descriptors corrupted! [ 60.576932] ip_tables: (C) 2000-2006 Netfilter Core Team [ 60.612879] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 60.613010] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 60.613085] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 60.613164] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 62.870967] sky2 eth0: enabling interface [ 63.001161] sky2 eth1: enabling interface [ 64.590952] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 64.684550] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control rx [ 64.855065] NET: Registered protocol family 10 [ 64.855617] lo: Disabled Privacy Extensions [ 67.227030] tun: Universal TUN/TAP device driver, 1.6 [ 67.227033] tun: (C) 1999-2004 Max Krasnyansky [ 67.227522] tun0: Disabled Privacy Extensions [ 71.123321] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 71.179079] NFSD: starting 90-second grace period [ 75.507098] eth1: no IPv6 routers present [ 75.780100] eth0: no IPv6 routers present [ 78.751422] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 82.938955] nvidia: module license 'NVIDIA' taints kernel. [ 83.194540] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 83.194545] nvidia 0000:02:00.0: setting latency timer to 64 [ 83.195363] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.29 Wed Feb 4 23:39:47 PST 2009 [ 83.195847] IRQ 24/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs [ 104.451008] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 134.111996] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 229.575741] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 259.354172] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 354.818258] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 384.508820] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 479.970535] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 509.703741] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 605.192937] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 634.911252] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 638.041241] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 730.354658] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 763.050023] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 764.377027] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:fb:00:23:df:04:e6:d9:08:00 SRC=192.168.0.166 DST=224.0.0.251 LEN=76 TOS=0x00 PREC=0x00 TTL=255 ID=16211 PROTO=UDP SPT=5353 DPT=5353 LEN=56 [ 764.626910] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:fb:00:23:df:04:e6:d9:08:00 SRC=192.168.0.166 DST=224.0.0.251 LEN=76 TOS=0x00 PREC=0x00 TTL=255 ID=16214 PROTO=UDP SPT=5353 DPT=5353 LEN=56 [ 764.865487] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:fb:00:23:df:04:e6:d9:08:00 SRC=192.168.0.166 DST=224.0.0.251 LEN=94 TOS=0x00 PREC=0x00 TTL=255 ID=16215 PROTO=UDP SPT=5353 DPT=5353 LEN=74 [ 764.965353] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:fb:00:23:df:04:e6:d9:08:00 SRC=192.168.0.166 DST=224.0.0.251 LEN=76 TOS=0x00 PREC=0x00 TTL=255 ID=16216 PROTO=UDP SPT=5353 DPT=5353 LEN=56 [ 795.872999] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:fb:00:23:df:04:e6:d9:08:00 SRC=192.168.0.166 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=16231 PROTO=UDP SPT=5353 DPT=5353 LEN=90 [ 827.899006] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:fb:00:23:df:04:e6:d9:08:00 SRC=192.168.0.166 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=16235 PROTO=UDP SPT=5353 DPT=5353 LEN=90 [ 855.523811] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 888.399918] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1013.600447] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1016.087649] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1105.756496] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1141.307625] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1230.939624] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1266.472667] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1356.120797] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1391.644549] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1481.168966] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1516.860677] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1606.461344] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1641.991865] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1731.672274] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1767.193299] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1767.707465] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1856.813594] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1857.140245] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1981.981190] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 1982.358323] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2043.753678] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2046.753733] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2107.181912] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2157.708262] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2232.334697] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2282.946311] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2357.502414] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2408.174474] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2533.333416] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2533.819623] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2658.917772] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2709.293660] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2720.838922] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2834.577002] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2845.940199] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2959.653909] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2971.093748] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 [ 2978.693673] AIF:Spoofed packet: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:16:e0:3a:86:00:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2